| |
Roofing and Gutters Pine Ridge Fl
Categories
Child Safety Latches Bonita Springs Fl Roof vents Marco Island Florida Contractor Fort Myers Fl Flashing - replace and repair Lely West Coast Fl Shelving Installation Naples Manor Fl Ceiling leaks Cape Coral West Coast Fl French doors Lely Florida Roofing and Gutters Pine Ridge Fl |
|
| | Do you have decorative brick work or natural stone that you need to clean but are afraid you could damage it? You should be weary, as it is very easy to damage if you do not clean it correctly. Improper use of cleaning chemicals can destroy it, discolor it, and ruin it. Using the wrong kind of brush can do the same thing. Cleaning it with a pressure washer could be your best bet, but if you use the wrong pressure tip, all bets are off on that too. The biggest problem with using a pressure washers come from inappropriately choosing the wrong tip. For instance a "zero tip" will dig a horrible hole, which is just terrible unless you are attempting to drill a hole for an anchor iron to hang something. The zero tip could cut off someone's finger if it were used as a weapon. Another common tip to use is the 15 degree tip, most all pressure washers, even the little electric, Chinese built home units often have these. And although these little units only have 800 to 1500 psi, with a zero tip, if you get too close to the natural stone you can very easily cause permanent damage. Thus, I recommend keeping the pressure wand 12 inches away at all times when cleaning natural brick and to choose a 25 degree tip or larger, I recommend a 45 degree tip just to play it safe. The second problem with folks that clean natural brick is using the wrong chemicals that can permanently stain the brick, so it's best to use a semi-hard bristle brush, soap and water and a 45 degree pressure washing tip at the end of the gun or wand. | |
|
|
When hiring a general contractor for your project, you will have a bid or negotiated contract that will include a percentage for the contractor's overhead and profit. If you have requested a cost breakdown from your contractor you will likely see a percentage for their contractor markup. What you probably won't see is the markup for materials purchased and for material and labor costs as well as the overhead and profit for any trades or subcontractors awarded work by a general contractor for your project. You also will not see what the contractor paid for materials he's bought in bulk and taken from his inventory to use on your project. Nobody expects a contractor to work for free, if they did, they wouldn't be in business for long and we'd be going a lot more new construction and renovation work. Before signing a contract it helps to have a clear understanding of what you are really paying for.
Every person has big dreams of having an awesome, new and stylish house. Therefore it is important that you build a new home or make home renovation. It is possible to get bored of the old styled rooms, kitchen, bathrooms, sitting room and drawing rooms...
So you're thinking about a small bathroom remodel and the steps you will need to take. Part of that thought process is undoubtedly should I hire a contractor to do the work or should I tackle some of it myself. How extensively you plan to remodel, your current living conditions, level of patience and tolerance for disruption along with your financial situation will likely determine the direction you take. Another factor will be how soon do you need it done and are you willing to do some of the tear out work yourself in the interest of saving some money? Here are some things to consider...
|
|